KestrelMet 6000 AG Weather Station

Text or Email alerts can be sent when a specific parameter is out of range.

If the value exceeds (greater than or less than) the alert amount, a text or email is sent.

Once the value falls within the normal range, the alert is reset, and an alarm can be sent again once outside the range again. This prevents repeated alerts for the same parameter.

The Notification Time Window is the minimum time after an alert can be repeated for the same condition. This is useful for parameters like wind speed, that change often and rapidly.

Here is an example scenario with the Notification Time Window set to 10 minutes.

If Wind Speed is greater than 20, send an alert.

• Time: 2:00 pm. Wind Speed is 24. Alert is sent.
• Time: 2:03 pm. Wind Speed is 12. Alert is reset.
• Time: 2:05 pm. Wind Speed is 26. Alert is not set because 5 minutes ago, the alert was already sent.
• Time: 2:12 pm. Wind Speed is 24. Alert is sent.

More than one alert can be set for the same parameter. Here is an example

Wind Speed > 20 mph

Wind Speed > 30 mph

Wind Speed > 40 mph

How Ambient Weather Uses Cookies

A cookie is a small piece of text sent to your browser by a website you visit. It helps our website remember information about your visit, like your preferred units of measure, and login credentials. That can make your next visit easier and our site more useful to you. Cookies play an important role. Without them, using the web would be a much more frustrating experience.

Google Analytics

We also use Google Analytics for tracking our website performance. It is Google’s analytics tool that helps website and app owners understand how their visitors engage with their website properties. It uses a set of cookies to collect information and report site usage statistics without personally identifying individual visitors to Google. The main cookie used by Google Analytics is the ‘_ga’ cookie.

WeatherUnderground.com (or <href="wunderground.com"> Wunderground.com) is a free, public weather data hosting service, and has accumulated the largest number of reporting weather stations in the world.</href="wunderground.com">

Weather Underground is owned by IBM, where the data is used for prediction services.

Share and compare your data with neighbors, friends and family.

Wunderground.com Features:

• The most popular personal weather station (PWS) hosting service in the world
• Free ‘cloud based’ service
• Real-time Streaming Updates (rapid fire)
• Weather Station Google Mapping
• Unlimited Historical data archiving (daily, monthly, yearly and custom)
• WeatherCam integration with time lapse video and daily archiving (weathercams sold separately)

1. To create a free account, visit: www.wunderground.com
2. Once you have created an account, select My Profile | My Weather Stations, or link below: https://www.wunderground.com/personal-weather-station/mypws
3. Tap the Add a New PWS button and proceed through the wizard.
   
   
4. Once completed, you will receive a Station ID and Station Key:
   
   
5. Enter this Station ID and Station Key into AmbientWeather.net.
   Note: If you entered this station ID and key into the console, do not enter it in KestrelMet.net. You do not want redundant data reporting to Wunderground.com. To learn more about WeatherUnderground.com and other apps, please visit: Here

WeatherCam images can be uploaded, viewed, and shared on AmbientWeather.net. This feature is currently available on the website version.

From the devices panel, select Add WeatherCam

Next, choose the format for your camera (FTP or URL):

• FTP: Most network cameras include FTP upload.
• URL: If you are hosting on another website, provide a URL.

FTP: option:

The website automatically generates the servername, username, and password. Enter these credentials into your camera’s ftp network settings.

– Some cameras like Foscam may require you to enter the server header ftp://ftp.kestrelmet.net, rather than ftp.kestrelmet.net.

– Select passive mode (PASV), if available.

– The maximum upload interval is one minute. Program an upload interval of 60 seconds or greater.

Enter the static URL associated with your camera hosting software. An example for the Nest Camera is referenced below.

Once the camera image has successfully uploaded to the server, the image will appear next to the WeatherCam credentials.

To make your WeatherCam public, select the checkbox “Allow others to view your weather cam“. It will take up to 48 hours for approval. Only images that point outside and show a portion of the sky will be approved.

Once your WeatherCam is public, it will be displayed on the WeatherCam map:

The KestrelMet 6000 cellular weather station can ONLY connect to a cellular network (typically Verizon or AT&T according to your station’s SIM card for US customers), and cannot connect to a Wi-Fi network. You can use provider coverage maps, FCC maps (https://fcc.maps.arcgis.com/apps/webappviewer/index.html?id=6c1b2e73d9d749cdb7bc88a0d1bdd25b), or third-party tools such as the Open Signal app or RootMetrics app to plan an optimal location for your station. After your station is registered, you can use the signal indicators on the device's screen for live cellular signal readings.

KestrelMet Cellular Weather Station Operating modes:

When the power switch is flipped ON, the station will transmit once every 5 minutes for a period of 30 minutes and then revert to normal operation mode, transmitting every 15 minutes. During that time, the multicolor LED on the PV power panel will indicate the connection status:

• Blinking blue within 1 minute of powering on: Bluetooth initializing
• Flashing magenta (every 10 seconds): Attempting to connect to a cellular network
• Flashing green (every 10 seconds): Cellular network connected, Standard Operation
• Flashing blue (every 10 seconds): Cellular network connected, Power Saver Mode
• Flashing red (every 10 seconds): Cellular network connected, Logging Mode
• Flashing red (every 20 seconds): Hibernation Mode

The KestrelMet 6000 station is shipped with a fully charged battery and the station is designed to maintain Normal Operation in subfreezing weather. If solar charging is insufficient due to extended snow cover or installation in a shaded location, the station will change operating modes to conserve power as detailed in the table below:

IMPORTANT: If the station enters hibernation mode due to a depleted battery, the station must be left turned “on” and placed in direct sunlight to recharge. If the station is in hibernation mode for an extended period of time, the red LED will stop blinking. When the battery is charged sufficiently (typically 1-3 days), the station will switch back to Logging mode, then Normal Operation mode as charging allows. You will receive an email notification when the station returns to Normal Operation mode.

This video demonstrates the installation procedure:

You should choose the mobile carrier that has the best coverage for your area. It does not matter which carrier you personally use as you can see the data without having an AT&T or Verizon account.

The Cellular version uses cellular data. The Wi-Fi version transmits via Wi-Fi up to 1000 ft line of sight.

The cost is $50 per year to continue the coverage which is the lowest plan on the market today.

Sun coverage is important to keep the unit powered. So choosing a place with adequate sunlight will help keep it powered in low sun / cloudy conditions. The other consideration is in a unsheltered area and higher up to help catch the current wind conditions, bearing in mind that you may have to clean the rain gauge occasionally. Lastly, if you mount it next to something that radiates heat (i.e., a black fence), this could slightly raise the temperature readings. If you are using a tripod mount, you may want to secure it to the ground or weigh it down in higher wind areas.

Yes. You can add as many devices as you want to your account and toggle between them.

After entering your location into your account, a Google map lookup is done based on that location and uses the altitude of your location to calculate the barometric pressure.

A clogged rain bucket on your KestrelMet 6000 Cellular Weather Station can prevent accurate rainfall readings. Follow the steps in this video to easily unclog the rain bucket and keep your unit working properly.

Please see this video on how to install the soil sensor array to the KestrelMet 6000 weather station: Soil Sensor Array Installation ... Permalink

Please see this video on how to export / download your weather data: Exporting Data

Click here for more information

Transmission up to 1000 feet line of sight. Obstructions will affect the transmission range.

Recommendations for KestrelMet Wi-Fi Installation:

• The station should be mounted in a location with strong Wi-Fi signal strength.
• The KestrelMet 6000 Wi-Fi weather station can ONLY connect to a 2.4 GHz Wi-Fi network.
• You can use third-party tools such as a Wi-Fi analyzer app to plan an optimal location for your station. After your station is registered, you can use the signal indicators on AmbientWeather.net/Devices for live Wi-Fi signal readings.
• Avoid obstructions like buildings, trees, and structures in between your router and the KestrelMet Wi-Fi installation site.

Please watch this video for some troubleshooting techniques

Please see this video on installing the KestrelMet 6000 WiFi station:

Every KestrelMet weather station is checked against a precision NIST-traceable reference pressure sensor in our manufacturing process at the Boothwyn PA plant, and the pressure sensors that we use in the KestrelMet 6000 exhibit minimal drift over the 2-year warranty period. For these reasons, we have not engineered a pressure calibration interface for the KestrelMet 6000.

To compare pressure conditions from one location to another, meteorologists correct pressure to sea-level conditions. Because the air pressure decreases as you rise in altitude, the sea-level corrected pressure (the pressure your location would be at if located at sea-level) is generally higher than your measured pressure.

Thus, your absolute pressure may read 28.62 inHg (969 mb) at an altitude of 1000 feet (305 m), but the relative pressure is 30.00 inHg (1016 mb).

The standard sea-level pressure is 29.92 inHg (1013 mb). This is the average sea-level pressure around the world. Relative pressure measurements greater than 29.92 inHg (1013 mb) are considered high pressure and relative pressure measurements less than 29.92 inHg are considered low pressure.

The pressure measurement displayed on AWN is relative pressure. To determine the relative pressure for your location, AWN locates an official reporting station near you, and sets your weather station relative pressure calculation parameters to match the official reporting station. Note that absolute pressure and relative pressure are both included when station data is downloaded.

Pressure details for CWOP MADIS L3 spatial failures:

Based on experience, MADIS failures come and go and are not necessarily an indicator that there is anything out of calibration, especially when barometric pressure is the measurement in question. For MADIS L3 spatial failures, it is very unlikely that your pressure sensor is the cause. This forum thread provides some useful perspectives on the L3 spatial failure, including one user who tried recalibrating their pressure sensor seasonally in an attempt to make the L3 error go away:
https://groups.io/g/wxqc/topic/chasing_the_calibration_tail/21375996

If you have already confirmed that you are sending the correct altitude to CWOP, then it may be one of the nearby stations that is causing the L3 error. Alternatively, you could try changing the altitude in the CWOP interface which will effectively adjust the relative pressure calculated by CWOP.